| Item | T9000 series inverter |
| Control mode | V/F control；Open loop vector control (without PG); Closed loop vector control (with PG) |
| Maximum frequency | 0~600Hz |
| Carrier frequency | 0.5kHz~16kHz
The carrier frequency is automatically adjusted based on the load features. |
| Input frequency resolution | Digital setting:0.01Hz
Analog setting: Maximum frequency 0.025% |
| Startup torque | G type: 0.5Hz/150%(SFVC) ； P type: 0.5Hz/100% |
| Speed range | 1:100(SVC) |
| Speed stability accuracy | ±0.5%(SVC) |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current.
P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto boost or Customized boost 0.1%-30.0% |
| V/F cure | Straight-line VF curve; Multi-point VF curve; N-power VF curve(1.2-power,1.4-power,1.6-power,1.8-power,square) |
| V/F separation | 2 types: complete separation；half separation |
| Ramp mode | Straight-line ramp ; Four groups of acceleration/deceleration time with the range of 0.00'6500.0s |
| Simple PLC, Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states |
| Auto voltage regulation | It can keep constant output voltage automatically when the mains voltage changes |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the FVC mode. |
| Support for multiple PG card | Support for differential input PG card, resolver PG card ,rotating transformer PG card |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Timing control | Timing range:0.0Min~6500.0Min |
| High performance | Control of asynchronous motor are implemented through the high-performance current vector control technology. |
| Rapid dip ride through | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. |
| Altitude | Lower than 1000m |
| Ambient temperature | -10℃-+40℃(de-rated if the ambient temperature is between 40℃-50℃) |
| Vibration | Less than 5.9m/s²(0.6g) |
